Non Alloy Cold Rolled Colour Coated Steel SION Modified

Cold Rolled Zinc and Aluminium Colour Coated Non Alloy Steel Sheets SION Notified

[DGFT Public Notice No. 33 dated 30th November 2012]

Subject: 1. Modification of SION C-469

2. Fixation of two new SIONs

In exercise of the powers conferred under Paragraph 2.4 of the Foreign Trade Policy, 2009-14 and Paragraph 1.1 of the Handbook of Procedures (Vol.1), the Directorate General of Foreign Trade hereby notifies the following in Handbook of Procedure Vol.II (SION Book):-

2.  The existing entry at SION C-469 is as follows:-

SION

Export Product

Quantity

 

Import Items

Quantity

C-469

Cold Rolled Galvanised Colour Coated Non Alloy Steel Sheets/ hoops & Strips/ Wide Coils having Zinc coating of 180 gm per Sq.m @40 Sq.M per litre Primer, 20 Sq.M per litre as Top Coat and 25 Sq.Mtr. Per litr. As Backer given in Engineering Table 1.

1000 kg

1.

Non Alloy Hot Rolled Steel Sheets/ Strips/ Wide Coils

1130 kgs.

2.

Rolling Mill Rolls

1.25 kgs.

3.

Rolling Oil

0.35 kg.

4.

Pickling Oil

0.45 kg.

5.

Steel Strapping

2.0 kgs.

6.

VCI Rusto - Paper

5.0 Sq.mtrs.

7.

Zinc

*

8.

Guard Film

*

9.

Paints (Ltrs.)

*

 

(a) Primer

 

 

(b) Tap Coat

 

 

(c) Backer

 

*Note: While the quantity of item nos. 1 to 6 will remain the same for all thickness of the product, the quantity of items 7 to 9 will be as per the Engineering Table 1 given at end of this product group.

3.  SION at S. No. C-469 is now modified as under:-

SION

Export Product

Quantity

 

Import Items

Quantity

C-469

Cold Rolled Galvanised Colour Coated Non Alloy Steel Sheets/Hoops & Strips/Wide Coils (Plain/Corrugated) having coating thickness of Primer 4-10 Micron, Backer 4-14 Micron and Top Coat 12-28 Micron

1000 Kgs.

1.

(a) Cold Rolled Galvanised Non Alloy Steel Strips/Wide Coils

Or

(b) Cold Rolled Full Hard/Close Annealed Non Alloy Steel Strips/ Wide Coils

Or

(c) Hot Rolled Non Alloy Steel Strips/Wide Coils

(a) 1.01 x Cold Rolled Galvanised Steel content as specified in Engg. Table-1 A

Or

(b) 1.05 x Cold Rolled Steel content as specified in Engg. Table-1 B

 

Or

(c) 1.118 x Cold Rolled Steel content as specified in Engg. Table-1 B

2.

Paint-Primer (litre)

As per Engg. Table-1A

3.

Paint-Back Coat (litre)

As per Engg. Table-1A

4.

Paint-Top Coat (litre)

As per Engg. Table-1A

5.

Zinc Slab/ Ingots (kg)

1.1 x Zinc content as specified in Engg. Table-1C

6.

Rolling Mill Rolls

1.25 Kg.

7.

Rolling Oil

0.35 Kg.

8.

Pickling Oil

0.45 Kg.

9.

Steel Strappings/ Galvanised Plain Sheets for packing

As per packing Policy

 

 

10.

VCI Rusto Paper

5.0 Sq.Mtr.

11.

Guard Film (kg.)

As per Engg. Table-1A

12.

Applicator Rolls

0.13 Kg.

Note: (i) Import Item No. 5 will be allowed, only when import item no. 1(b) or 1(c) is imported.

(ii)  Import Item Nos. 6 & 7 will be allowed, only when import item no. 1(c) is imported

(iii)  Import Item No. 8 will be allowed, only when import item no. 1(b) or 1(c) is imported

4.  New SION at Serial number C-2054 shall be as under:-

SION

Export Product

Quantity

 

Import Items

Quantity

C-2054

Cold Rolled Un-Galvanised Colour Coated Non Alloy Steel Sheets/Hoops & Strips/Wide Coils having coating thickness of Primer 4-10 Micron, Backer 4-14 Micron and Top Coat 12-28 Micron

1000 Kg.

1.

(a) Cold Rolled Full Hard/Close Annealed Non Alloy Steel Strips/ Wide Coils

Or

(b) Hot Rolled Non Alloy Steel Strips/ Wide Coils

(a) 1.01 x Cold Rolled Steel content as specified in Engg. Table-1D

Or

(b) 1.10 x Cold Rolled Steel content as specified in Engg. Table-1D

2.

Paint-Primer (litre)

As per Engg. Table-1D

3.

Paint-Back Coat (litre )

As per Engg. Table-1D

4.

Paint-Top Coat (litre )

As per Engg. Table-1D

5.

Rolling Mill Rolls

1.25 Kg.

6.

Rolling Oil

0.35 Kg.

7.

Pickling Oil

0.45 Kg.

8.

Steel Strappings/ Galvanised Plain Sheets for Packing

As per Packing Policy

9.

VCI Rusto Paper

5.0 Sq.Mtr.

10.

Guard Film (kg.)

As per Engg. Table-1D

11.

Applicator Rolls

0.13 Kg.

Note: (i) Import Item Nos. 5 & 6 will be allowed, only when import item no. 1(b) is imported.

5.  New SION at Serial number C-2055 shall be as under:-

SION

Export Product

Quantity

 

Import Items

Quantity

C-2055

Cold Rolled Zinc (43.5%) & Aluminium Silicon (56.5%) Alloy Coated Colour Coated Non Alloy Steel Sheets/ Strips/Wide Coils (Plain/ Corrugated) having coating thickness of Primer 4-10 Micron, Backer 4-14 Micron and Top Coat 12-28 Micron

1000 Kg.

1.

(a) Cold Rolled Zinc (43.5%) & Aluminium-Silicon (56.5%) Alloy Coated Non Alloy Steel Strips/ Wide Coils

 

Or

(b) Cold Rolled Non Alloy Steel Strips/Wide Coils
 
 

Or

(c) Hot Rolled Non Alloy Steel Strips/ Wide Coils

(a) 1.01 x Cold Rolled Zinc (43.5%) & Aluminium-Silicon (56.5%) Alloy Coated Steel content as specified in Engg. Table-1E

 

Or

(b) 1.05 x Cold Rolled Steel content as specified in Engg. Table-1F

Or

(c) 1.118 x Cold Rolled Steel content as specified in Engg. Table-1F

2.

Paint-Primer (litre)

As per Engg. Table-1E

3.

Paint-Back Coat (litre)

As per Engg. Table-1E

4.

Paint-Top Coat (litre)

As per Engg. Table-1E

5.

Zinc Slab/ Ingots (kg.)

1.15 x 0.435 x Zinc-AL-SI content as specified in Engg. Table-1G

6.

Aluminium Silicon Alloy Slab/Ingots (kg.)

1.15 x 0.565 x Zinc-AL-SI content as specified in Engg. Table-1G

7.

Rolling Mill Rolls

1.25 Kg.

8.

Rolling Oil

0.35 Kg.

9.

Pickling Oil

0.45 Kg.

10.

Steel Strappings/ Galvanised Plain Sheets for packing

As per Packing Policy

11.

VCI Rusto Paper

5.0 Sq. Mtr.

12.

Guard Film (kg.)

As Per Engg. Table-1E

13.

Applicator Rolls

0.13 Kg.

Note: (i) Import Item Nos. 5 & 6 will be allowed, only when import item no. 1(b) or 1(c) is imported

(ii)  Import Item Nos. 7 & 8 will be allowed, only when import item no. 1(c) is imported

(iii)  Import Item No. 9 will be allowed, only when import item no.1 (b) or 1(c) is imported.

6.   The existing Engineering Table 1 in Handbook of Procedures Vol.II is hereby deleted and is substituted by Engineering Tables 1A, 1B, 1C, 1D, 1E, 1F and 1G which are annexed to this Public Notice.

7.   Effect of Public Notice:-

(i)   Existing SION C-469 has been modified. Non Alloy Cold Rolled Steel is added as an input. Based upon the thickness of the export product, quantity of corresponding inputs has been prepared in tabular form as mentioned in Engineering Tables 1A, 1B and 1C.

(ii)  Two new SIONs are notified for export products “Cold Rolled colour coated non alloy steel sheets” and “Cold Rolled Zinc & Aluminium Silicon Alloy Coated Colour Coated Non Alloy Steel Sheets”.

(iii)  Engineering Table 1 is substituted by comprehensive Engineering Tables 1A, 1B, 1C, 1D, 1E, 1F and 1G which denote the export product and corresponding inputs.

Engineering Table-1A (PPGI)

Export Product: Cold Rolled Galvanised Colour Coated Non Alloy Steel Sheets/hoops & strips/ wide coils )(Plain / Corrugated)

Sl.No.

Export Product Thickness Range

(In mm)

Paints

Guard Film
(Kg)

Content of Substrate
(CR Galvanised)
(kgs

a

b

Primer
(litre)

Back Coat
(litre)

Top Coat
(litre)

1

0.10

0.12

38.218

46.066

81.895

66.93

904.058

2

0.13

0.15

27.731

33.426

59.423

48.56

930.384

3

0.16

0.18

21.760

26.229

46.629

38.11

945.373

4

0.19

0.21

17.905

21.582

38.368

31.36

955.051

5

0.22

0.24

15.210

18.334

32.593

26.64

961.816

6

0.25

0.27

13.220

15.935

28.329

23.15

966.811

7

0.28

0.3

11.691

14.092

25.052

20.47

970.651

8

0.31

0.33

10.479

12.631

22.455

18.35

973.694

9

0.34

0.36

9.494

11.444

20.345

16.63

976.165

10

0.37

0.39

8.679

10.461

18.598

15.20

978.212

11

0.40

0.42

7.993

9.634

17.127

14.00

979.935

12

0.43

0.45

7.407

8.928

15.872

12.97

981.406

13

0.46

0.48

6.901

8.318

14.788

12.09

982.676

14

0.49

0.51

6.460

7.787

13.843

11.31

983.783

15

0.52

0.54

6.072

7.319

13.011

10.63

984.757

16

0.55

0.57

5.728

6.904

12.274

10.03

985.621

17

0.58

0.6

5.420

6.534

11.615

9.49

986.392

18

0.61

0.63

5.145

6.201

11.024

9.01

987.085

19

0.64

0.66

4.895

5.901

10.490

8.57

987.711

20

0.67

0.69

4.669

5.628

10.005

8.18

988.278

21

0.70

0.72

4.463

5.379

9.564

7.82

988.796

22

0.73

0.75

4.274

5.152

9.159

7.49

989.270

23

0.76

0.78

4.101

4.943

8.787

7.18

989.705

24

0.79

0.81

3.941

4.750

8.445

6.90

990.107

25

0.82

0.84

3.793

4.572

8.128

6.64

990.478

26

0.85

0.87

3.656

4.407

7.834

6.40

990.823

27

0.88

0.9

3.528

4.253

7.560

6.18

991.143

28

0.91

0.93

3.409

4.109

7.305

5.97

991.442

29

0.94

0.96

3.298

3.975

7.067

5.78

991.721

30

0.97

0.99

3.194

3.850

6.844

5.59

991.983

31

1.00

1.02

3.096

3.732

6.634

5.42

992.228

32

1.03

1.05

3.004

3.621

6.437

5.26

992.459

33

1.06

1.08

2.917

3.516

6.251

5.11

992.677

34

1.09

1.11

2.835

3.418

6.076

4.97

992.882

35

1.12

1.14

2.758

3.324

5.910

4.83

993.077

36

1.15

1.17

2.685

3.236

5.753

4.70

993.260

37

1.18

1.2

2.615

3.152

5.604

4.58

993.435

38

1.21

1.23

2.549

3.073

5.463

4.46

993.600

39

1.24

1.26

2.486

2.997

5.328

4.35

993.758

40

1.27

1.29

2.427

2.925

5.200

4.25

993.908

41

1.30

1.32

2.370

2.857

5.078

4.15

994.051

42

1.33

1.35

2.316

2.791

4.962

4.06

994.187

43

1.36

1.38

2.264

2.729

4.851

3.96

994.317

44

1.39

1.41

2.214

2.669

4.745

3.88

994.442

45

1.42

1.44

2.167

2.612

4.643

3.79

994.561

46

1.45

1.47

2.121

2.557

4.545

3.71

994.675

47

1.48

1.5

2.078

2.504

4.452

3.64

994.784

48

1.51

1.53

2.036

2.454

4.362

3.57

994.890

49

1.54

1.56

1.996

2.405

4.276

3.49

994.990

50

1.57

1.59

1.957

2.359

4.193

3.43

995.087

51

1.60

1.62

1.920

2.314

4.114

3.36

995.181

Engineering Table-1B (PPGI)


Export Product: Cold Rolled Galvanized Colour Coated Non Alloy Steel Sheets/ Hoops & Strips/Wide Coils (Plain / Corrugated)

Sl. No.

Export Product Thickness Range (mm)

CR Content (kgs) for different thickness of export product and different Zinc coating class in gms/m2

 

a

b

 

 

 

30-49

50-69

70-89

90-109

110-129

130-149

150-169

1

0.10

0.12

843.0

811.0

778.8

746.4

713.8

681.0

648.0

2

0.13

0.15

885.4

862.1

838.8

815.3

791.8

768.1

744.3

3

0.16

0.18

909.7

891.5

873.2

854.8

836.4

817.8

799.3

4

0.19

0.21

925.6

910.5

895.5

880.4

865.2

850.0

834.8

5

0.22

0.24

936.7

923.9

911.1

898.3

885.4

872.5

859.6

6

0.25

0.27

944.9

933.8

922.7

911.5

900.4

889.2

877.9

7

0.28

0.30

951.2

941.4

931.6

921.7

911.8

902.0

892.1

8

0.31

0.33

956.2

947.4

938.6

929.8

921.0

912.1

903.2

9

0.34

0.36

960.3

952.4

944.4

936.4

928.4

920.3

912.3

10

0.37

0.39

963.7

956.4

949.1

941.8

934.5

927.2

919.8

11

0.40

0.42

966.6

959.9

953.1

946.4

939.7

932.9

926.2

12

0.43

0.45

969.0

962.8

956.6

950.3

944.1

937.8

931.6

13

0.46

0.48

971.1

965.3

959.5

953.7

947.9

942.1

936.3

14

0.49

0.51

973.0

967.5

962.1

956.7

951.2

945.8

940.3

15

0.52

0.54

974.6

969.5

964.4

959.3

954.2

949.0

943.9

16

0.55

0.57

976.0

971.2

966.4

961.6

956.7

951.9

947.1

17

0.58

0.60

977.3

972.7

968.2

963.6

959.1

954.5

949.9

18

0.61

0.63

978.5

974.1

969.8

965.5

961.1

956.8

952.5

19

0.64

0.66

979.5

975.4

971.3

967.1

963.0

958.9

954.8

20

0.67

0.69

980.4

976.5

972.6

968.7

964.7

960.8

956.9

21

0.70

0.72

981.3

977.5

973.8

970.0

966.3

962.5

958.8

22

0.73

0.75

982.1

978.5

974.9

971.3

967.7

964.1

960.5

23

0.76

0.78

982.8

979.4

975.9

972.5

969.0

965.6

962.1

24

0.79

0.81

983.5

980.2

976.9

973.5

970.2

966.9

963.6

25

0.82

0.84

984.1

980.9

977.7

974.5

971.3

968.1

965.0

26

0.85

0.87

984.7

981.6

978.5

975.5

972.4

969.3

966.2

27

0.88

0.90

985.2

982.2

979.3

976.3

973.3

970.4

967.4

28

0.91

0.93

985.7

982.8

980.0

977.1

974.2

971.4

968.5

29

0.94

0.96

986.2

983.4

980.6

977.9

975.1

972.3

969.5

30

0.97

0.99

986.6

983.9

981.2

978.6

975.9

973.2

970.5

31

1.00

1.02

987.0

984.4

981.8

979.2

976.6

974.0

971.4

32

1.03

1.05

987.4

984.9

982.4

979.8

977.3

974.8

972.2

33

1.06

1.08

987.8

985.3

982.9

980.4

978.0

975.5

973.0

34

1.09

1.11

988.1

985.7

983.3

981.0

978.6

976.2

973.8

35

1.12

1.14

988.4

986.1

983.8

981.5

979.2

976.8

974.5

36

1.15

1.17

988.7

986.5

984.2

982.0

979.7

977.5

975.2

37

1.18

1.20

989.0

986.8

984.6

982.4

980.2

978.0

975.8

38

1.21

1.23

989.3

987.2

985.0

982.9

980.7

978.6

976.4

39

1.24

1.26

989.6

987.5

985.4

983.3

981.2

979.1

977.0

40

1.27

1.29

989.8

987.8

985.7

983.7

981.7

979.6

977.6

41

1.30

1.32

990.1

988.1

986.1

984.1

982.1

980.1

978.1

42

1.33

1.35

990.3

988.3

986.4

984.4

982.5

980.5

978.6

43

1.36

1.38

990.5

988.6

986.7

984.8

982.9

981.0

979.1

44

1.39

1.41

990.7

988.8

987.0

985.1

983.3

981.4

979.5

45

1.42

1.44

990.9

989.1

987.3

985.4

983.6

981.8

980.0

46

1.45

1.47

991.1

989.3

987.5

985.8

984.0

982.2

980.4

47

1.48

1.50

991.3

989.5

987.8

986.0

984.3

982.5

980.8

48

1.51

1.53

991.5

989.7

988.0

986.3

984.6

982.9

981.2

49

1.54

1.56

991.6

989.9

988.3

986.6

984.9

983.2

981.6

50

1.57

1.59

991.8

990.1

988.5

986.9

985.2

983.6

981.9

51

1.60

1.62

991.9

990.3

988.7

987.1

985.5

983.9

982.3

Engineering Table-1B (PPGI)

Export Product: Cold Rolled Galvanized Colour Coated Non Alloy Steel Sheets/ Hoops & Strips/Wide Coils(Plain / Corrugated)

Sl. No.

Export Product Thickness Range (mm)

CR Content (kgs) for different thickness of export product and different Zinc coating class in gms/m2 

a

b

 

 

 

170-189

190-209

210-229

230-249

250-269

270-289

290-309

1

0.10

0.12

614.8

581.3

547.7

513.8

479.7

445.4

410.9

2

0.13

0.15

720.4

696.4

672.3

648.1

623.8

599.3

574.8

3

0.16

0.18

780.6

761.9

743.1

724.3

705.4

686.4

667.3

4

0.19

0.21

819.5

804.1

788.8

773.3

757.9

742.3

726.8

5

0.22

0.24

846.6

833.7

820.6

807.6

794.5

781.4

768.2

6

0.25

0.27

866.7

855.4

844.1

832.8

821.5

810.1

798.7

7

0.28

0.30

882.1

872.2

862.2

852.2

842.2

832.2

822.1

8

0.31

0.33

894.3

885.4

876.5

867.6

858.6

849.7

840.7

9

0.34

0.36

904.3

896.2

888.1

880.0

872.0

863.8

855.7

10

0.37

0.39

912.5

905.1

897.8

890.4

883.0

875.6

868.2

11

0.40

0.42

919.4

912.6

905.9

899.1

892.3

885.4

878.6

12

0.43

0.45

925.3

919.0

912.8

906.5

900.2

893.9

887.6

13

0.46

0.48

930.4

924.6

918.7

912.9

907.0

901.1

895.3

14

0.49

0.51

934.9

929.4

923.9

918.4

913.0

907.5

902.0

15

0.52

0.54

938.8

933.6

928.5

923.4

918.2

913.0

907.9

16

0.55

0.57

942.2

937.4

932.6

927.7

922.8

918.0

913.1

17

0.58

0.60

945.3

940.8

936.2

931.6

927.0

922.4

917.8

18

0.61

0.63

948.1

943.8

939.4

935.1

930.7

926.4

922.0

19

0.64

0.66

950.6

946.5

942.4

938.2

934.1

929.9

925.8

20

0.67

0.69

952.9

949.0

945.0

941.1

937.1

933.2

929.2

21

0.70

0.72

955.0

951.2

947.5

943.7

939.9

936.1

932.3

22

0.73

0.75

956.9

953.3

949.7

946.1

942.5

938.8

935.2

23

0.76

0.78

958.6

955.2

951.7

948.3

944.8

941.3

937.8

24

0.79

0.81

960.3

956.9

953.6

950.3

946.9

943.6

940.3

25

0.82

0.84

961.8

958.6

955.4

952.1

948.9

945.7

942.5

26

0.85

0.87

963.1

960.1

957.0

953.9

950.8

947.7

944.6

27

0.88

0.90

964.4

961.4

958.5

955.5

952.5

949.5

946.5

28

0.91

0.93

965.6

962.7

959.9

957.0

954.1

951.2

948.3

29

0.94

0.96

966.7

964.0

961.2

958.4

955.6

952.8

950.0

30

0.97

0.99

967.8

965.1

962.4

959.7

957.0

954.3

951.6

31

1.00

1.02

968.8

966.2

963.6

960.9

958.3

955.7

953.1

32

1.03

1.05

969.7

967.2

964.6

962.1

959.6

957.0

954.5

33

1.06

1.08

970.6

968.1

965.7

963.2

960.7

958.3

955.8

34

1.09

1.11

971.4

969.0

966.6

964.2

961.8

959.4

957.1

35

1.12

1.14

972.2

969.9

967.5

965.2

962.9

960.6

958.2

36

1.15

1.17

972.9

970.7

968.4

966.1

963.9

961.6

959.3

37

1.18

1.20

973.6

971.4

969.2

967.0

964.8

962.6

960.4

38

1.21

1.23

974.3

972.1

970.0

967.8

965.7

963.5

961.4

39

1.24

1.26

974.9

972.8

970.7

968.6

966.5

964.4

962.3

40

1.27

1.29

975.5

973.5

971.4

969.4

967.3

965.3

963.2

41

1.30

1.32

976.1

974.1

972.1

970.1

968.1

966.1

964.1

42

1.33

1.35

976.7

974.7

972.7

970.8

968.8

966.9

964.9

43

1.36

1.38

977.2

975.3

973.4

971.5

969.5

967.6

965.7

44

1.39

1.41

977.7

975.8

973.9

972.1

970.2

968.3

966.5

45

1.42

1.44

978.2

976.3

974.5

972.7

970.8

969.0

967.2

46

1.45

1.47

978.6

976.8

975.0

973.2

971.5

969.7

967.9

47

1.48

1.50

979.1

977.3

975.6

973.8

972.0

970.3

968.5

48

1.51

1.53

979.5

977.8

976.0

974.3

972.6

970.9

969.2

49

1.54

1.56

979.9

978.2

976.5

974.8

973.2

971.5

969.8

50

1.57

1.59

980.3

978.6

977.0

975.3

973.7

972.0

970.4

51

1.60

1.62

980.6

979.0

977.4

975.8

974.2

972.6

970.9

Engineering Table-1C (PPGI)

Export Product: Cold Rolled Galvanized Colour Coated Non Alloy Steel Sheets/ Hoops & Strips/Wide Coils(Plain / Corrugated)

Sl.No.

Export Product Thickness Range (mm)

Zinc Content (kgs) for different thickness of export product and different coating class in gms/m2

 

a

b

 

 

 

30-49

50-69

70-89

90-109

110-129

130-149

150-169

1

0.10

0.12

62.80

94.50

126.39

158.49

190.79

223.29

256.00

2

0.13

0.15

45.85

68.93

92.12

115.41

138.81

162.32

185.94

3

0.16

0.18

36.10

54.25

72.47

90.75

109.09

127.51

145.99

4

0.19

0.21

29.77

44.73

59.73

74.77

89.86

104.99

120.17

5

0.22

0.24

25.33

38.05

50.80

63.57

76.39

89.23

102.11

6

0.25

0.27

22.05

33.10

44.19

55.30

66.43

77.58

88.77

7

0.28

0.30

19.51

29.30

39.10

48.92

58.77

68.63

78.51

8

0.31

0.33

17.50

26.28

35.07

43.87

52.69

61.53

70.38

9

0.34

0.36

15.87

23.82

31.78

39.76

47.75

55.76

63.77

10

0.37

0.39

14.51

21.78

29.07

36.36

43.66

50.97

58.30

11

0.40

0.42

13.37

20.07

26.77

33.49

40.21

46.95

53.69

12

0.43

0.45

12.39

18.60

24.82

31.04

37.27

43.51

49.76

13

0.46

0.48

11.55

17.34

23.13

28.93

34.73

40.54

46.36

14

0.49

0.51

10.82

16.23

21.65

27.08

32.52

37.96

43.40

15

0.52

0.54

10.17

15.26

20.36

25.46

30.57

35.68

40.80

16

0.55

0.57

9.59

14.40

19.21

24.02

28.84

33.66

38.48

17

0.58

0.60

9.08

13.63

18.18

22.73

27.29

31.85

36.42

18

0.61

0.63

8.62

12.94

17.25

21.58

25.90

30.23

34.57

19

0.64

0.66

8.20

12.31

16.42

20.53

24.65

28.77

32.89

20

0.67

0.69

7.83

11.74

15.66

19.59

23.51

27.44

31.38

21

0.70

0.72

7.48

11.23

14.97

18.72

22.48

26.23

29.99

22

0.73

0.75

7.17

10.75

14.34

17.93

21.53

25.12

28.72

23

0.76

0.78

6.88

10.32

13.76

17.21

20.65

24.10

27.56

24

0.79

0.81

6.61

9.92

13.22

16.54

19.85

23.17

26.48

25

0.82

0.84

6.36

9.54

12.73

15.92

19.11

22.30

25.49

26

0.85

0.87

6.13

9.20

12.27

15.34

18.41

21.49

24.57

27

0.88

0.90

5.92

8.88

11.84

14.81

17.77

20.74

23.71

28

0.91

0.93

5.72

8.58

11.44

14.31

17.17

20.04

22.91

29

0.94

0.96

5.53

8.30

11.07

13.84

16.61

19.39

22.16

30

0.97

0.99

5.36

8.04

10.72

13.40

16.09

18.78

21.46

31

1.00

1.02

5.19

7.79

10.39

12.99

15.60

18.20

20.81

32

1.03

1.05

5.04

7.56

10.08

12.61

15.13

17.66

20.19

33

1.06

1.08

4.89

7.34

9.79

12.24

14.70

17.15

19.61

34

1.09

1.11

4.76

7.14

9.52

11.90

14.28

16.67

19.06

35

1.12

1.14

4.63

6.94

9.26

11.58

13.90

16.22

18.54

36

1.15

1.17

4.50

6.76

9.01

11.27

13.53

15.78

18.04

37

1.18

1.20

4.39

6.58

8.78

10.98

13.18

15.38

17.58

38

1.21

1.23

4.28

6.42

8.56

10.70

12.84

14.99

17.13

39

1.24

1.26

4.17

6.26

8.35

10.44

12.53

14.62

16.71

40

1.27

1.29

4.07

6.11

8.15

10.19

12.23

14.27

16.31

41

1.30

1.32

3.98

5.97

7.96

9.95

11.94

13.93

15.93

42

1.33

1.35

3.89

5.83

7.78

9.72

11.67

13.62

15.56

43

1.36

1.38

3.80

5.70

7.60

9.50

11.41

13.31

15.21

44

1.39

1.41

3.72

5.58

7.44

9.30

11.16

13.02

14.88

45

1.42

1.44

3.64

5.46

7.28

9.10

10.92

12.74

14.56

46

1.45

1.47

3.56

5.34

7.12

8.91

10.69

12.47

14.26

47

1.48

1.50

3.49

5.23

6.98

8.72

10.47

12.22

13.96

48

1.51

1.53

3.42

5.13

6.84

8.55

10.26

11.97

13.68

49

1.54

1.56

3.35

5.03

6.70

8.38

10.06

11.73

13.41

50

1.57

1.59

3.29

4.93

6.57

8.22

9.86

11.51

13.15

51

1.60

1.62

3.22

4.83

6.45

8.06

9.67

11.29

12.90

Engineering Table-1C (PPGI)

Export Product: Cold Rolled Galvanized Colour Coated Non Alloy Steel Sheets/ Hoops & Strips/Wide Coils(Plain / Corrugated)

Sl. No.

Export Product Thickness Range (mm)

Zinc Content (kgs) for different thickness of export product and different coating class in gms/m2

 

a

b

 

 

 

170-189

190-209

210-229

230-249

250-269

270-289

290-309

1

0.10

0.12

288.92

322.05

355.40

388.96

422.73

456.73

490.94

2

0.13

0.15

209.67

233.51

257.45

281.51

305.69

329.97

354.37

3

0.16

0.18

164.53

183.15

201.83

220.58

239.40

258.29

277.25

4

0.19

0.21

135.39

150.66

165.97

181.33

196.74

212.19

227.69

5

0.22

0.24

115.02

127.96

140.93

153.94

166.98

180.06

193.17

6

0.25

0.27

99.97

111.20

122.46

133.74

145.05

156.38

167.73

7

0.28

0.30

88.41

98.33

108.27

118.22

128.20

138.20

148.22

8

0.31

0.33

79.24

88.12

97.02

105.94

114.86

123.81

132.77

9

0.34

0.36

71.80

79.84

87.89

95.96

104.04

112.13

120.24

10

0.37

0.39

65.63

72.98

80.34

87.70

95.08

102.47

109.87

11

0.40

0.42

60.44

67.20

73.97

80.75

87.54

94.34

101.14

12

0.43

0.45

56.01

62.28

68.55

74.82

81.11

87.40

93.70

13

0.46

0.48

52.19

58.02

63.86

69.71

75.56

81.42

87.28

14

0.49

0.51

48.85

54.31

59.77

65.24

70.72

76.20

81.69

15

0.52

0.54

45.92

51.05

56.18

61.32

66.46

71.61

76.76

16

0.55

0.57

43.32

48.15

52.99

57.84

62.69

67.54

72.40

17

0.58

0.60

40.99

45.57

50.15

54.73

59.32

63.91

68.51

18

0.61

0.63

38.91

43.25

47.59

51.94

56.29

60.65

65.01

19

0.64

0.66

37.02

41.15

45.29

49.42

53.56

57.71

61.85

20

0.67

0.69

35.31

39.25

43.19

47.14

51.09

55.04

58.99

21

0.70

0.72

33.75

37.52

41.28

45.05

48.83

52.60

56.38

22

0.73

0.75

32.32

35.93

39.54

43.15

46.76

50.37

53.99

23

0.76

0.78

31.01

34.47

37.93

41.39

44.86

48.33

51.79

24

0.79

0.81

29.80

33.13

36.45

39.78

43.11

46.44

49.77

25

0.82

0.84

28.69

31.88

35.08

38.28

41.49

44.69

47.90

26

0.85

0.87

27.65

30.73

33.81

36.90

39.98

43.07

46.16

27

0.88

0.90

26.68

29.66

32.63

35.61

38.59

41.57

44.55

28

0.91

0.93

25.78

28.66

31.53

34.41

37.28

40.16

43.04

29

0.94

0.96

24.94

27.72

30.50

33.28

36.07

38.85

41.64

30

0.97

0.99

24.15

26.84

29.54

32.23

34.92

37.62

40.32

31

1.00

1.02

23.41

26.02

28.63

31.24

33.85

36.47

39.08

32

1.03

1.05

22.72

25.25

27.78

30.31

32.85

35.38

37.92

33

1.06

1.08

22.06

24.52

26.98

29.44

31.90

34.36

36.82

34

1.09

1.11

21.44

23.83

26.22

28.61

31.00

33.39

35.79

35

1.12

1.14

20.86

23.18

25.50

27.83

30.16

32.48

34.81

36

1.15

1.17

20.30

22.56

24.83

27.09

29.35

31.62

33.88

37

1.18

1.20

19.78

21.98

24.18

26.39

28.59

30.80

33.01

38

1.21

1.23

19.28

21.43

23.57

25.72

27.87

30.02

32.17

39

1.24

1.26

18.80

20.90

22.99

25.09

27.19

29.28

31.38

40

1.27

1.29

18.35

20.40

22.44

24.49

26.53

28.58

30.63

41

1.30

1.32

17.92

19.92

21.91

23.91

25.91

27.91

29.91

42

1.33

1.35

17.51

19.46

21.41

23.36

25.32

27.27

29.22

43

1.36

1.38

17.12

19.03

20.93

22.84

24.75

26.66

28.57

44

1.39

1.41

16.74

18.61

20.47

22.34

24.21

26.07

27.94

45

1.42

1.44

16.39

18.21

20.03

21.86

23.69

25.51

27.34

46

1.45

1.47

16.04

17.83

19.61

21.40

23.19

24.98

26.77

47

1.48

1.50

15.71

17.46

19.21

20.96

22.71

24.46

26.21

48

1.51

1.53

15.40

17.11

18.82

20.54

22.25

23.97

25.69

49

1.54

1.56

15.09

16.77

18.45

20.13

21.81

23.50

25.18

50

1.57

1.59

14.80

16.45

18.09

19.74

21.39

23.04

24.69

51

1.60

1.62

14.52

16.13

17.75

19.37

20.98

22.60

24.22

Engineering Table-1D (PPCR)

Export Product: Cold Rolled Un-galvanised Colour Coated Non Alloy Steel Sheets/ Hoops & Strips/ Wide Coils

Sl.No.

Export Product Thickness Range (In mm)

 

Paints

Guard Film
(Kg)

Content of Substrate
(CR)

(kgs)

a

b

Primer
(litre)

Back Coat
(litre)

Top Coat
(litre)

1

0.10

0.12

37.150

44.779

79.607

65.06

906.739

2

0.13

0.15

27.164

32.743

58.209

47.57

931.806

3

0.16

0.18

21.410

25.806

45.878

37.49

946.253

4

0.19

0.21

17.667

21.295

37.858

30.94

955.649

5

0.22

0.24

15.038

18.126

32.224

26.34

962.248

6

0.25

0.27

13.090

15.778

28.051

22.92

967.138

7

0.28

0.30

11.589

13.969

24.834

20.30

970.907

8

0.31

0.33

10.397

12.532

22.279

18.21

973.900

9

0.34

0.36

9.427

11.363

20.201

16.51

976.334

10

0.37

0.39

8.623

10.393

18.477

15.10

978.353

11

0.40

0.42

7.945

9.576

17.025

13.91

980.055

12

0.43

0.45

7.366

8.878

15.784

12.90

981.509

13

0.46

0.48

6.865

8.275

14.712

12.02

982.765

14

0.49

0.51

6.429

7.749

13.776

11.26

983.861

15

0.52

0.54

6.044

7.285

12.952

10.58

984.827

16

0.55

0.57

5.703

6.874

12.221

9.99

985.683

17

0.58

0.60

5.398

6.507

11.568

9.45

986.448

18

0.61

0.63

5.125

6.177

10.982

8.97

987.135

19

0.64

0.66

4.877

5.879

10.452

8.54

987.756

20

0.67

0.69

4.653

5.608

9.970

8.15

988.319

21

0.70

0.72

4.448

5.362

9.532

7.79

988.834

22

0.73

0.75

4.261

5.135

9.130

7.46

989.304

23

0.76

0.78

4.088

4.928

8.760

7.16

989.737

24

0.79

0.81

3.929

4.736

8.420

6.88

990.136

25

0.82

0.84

3.782

4.559

8.105

6.62

990.505

26

0.85

0.87

3.646

4.394

7.812

6.38

990.848

27

0.88

0.90

3.519

4.241

7.540

6.16

991.166

28

0.91

0.93

3.400

4.099

7.287

5.96

991.464

29

0.94

0.96

3.290

3.965

7.049

5.76

991.741

30

0.97

0.99

3.186

3.840

6.827

5.58

992.002

31

1.00

1.02

3.089

3.723

6.619

5.41

992.246

32

1.03

1.05

2.997

3.613

6.422

5.25

992.476

33

1.06

1.08

2.911

3.508

6.237

5.10

992.693

34

1.09

1.11

2.829

3.410

6.063

4.95

992.897

35

1.12

1.14

2.752

3.317

5.898

4.82

993.091

36

1.15

1.17

2.679

3.229

5.741

4.69

993.274

37

1.18

1.20

2.610

3.146

5.593

4.57

993.448

38

1.21

1.23

2.544

3.067

5.452

4.46

993.613

39

1.24

1.26

2.482

2.992

5.318

4.35

993.770

40

1.27

1.29

2.422

2.920

5.191

4.24

993.919

41

1.30

1.32

2.366

2.851

5.069

4.14

994.061

42

1.33

1.35

2.312

2.786

4.953

4.05

994.197

43

1.36

1.38

2.260

2.724

4.843

3.96

994.327

44

1.39

1.41

2.210

2.664

4.737

3.87

994.451

45

1.42

1.44

2.163

2.607

4.635

3.79

994.570

46

1.45

1.47

2.118

2.553

4.538

3.71

994.683

47

1.48

1.50

2.074

2.500

4.445

3.63

994.793

48

1.51

1.53

2.033

2.450

4.356

3.56

994.897

49

1.54

1.56

1.993

2.402

4.270

3.49

994.998

50

1.57

1.59

1.954

2.355

4.187

3.42

995.095

51

1.60

1.62

1.917

2.311

4.108

3.36

995.188

Engineering Table-1E (PPGL)

Export Product: CR Zinc -Aluminium-Silicon Alloy Coated Colour Coated Non Alloy steel sheets/ strips/ wide coils (Plain / Corrugated)

Sl.No.

Export Product Thickness Range

(In mm)

 

Paints

Guard Film
(Kg)

Content of Substrate (CR Zn-Al-Si Alloy Coated Steel) (kgs)

 

a

b

Primer
(litre)

Back Coat
(litre)

Top Coat
(litre)

1

0.10

0.12

47.101

56.774

100.931

82.49

881.756

2

0.13

0.15

32.128

38.725

68.845

56.26

919.346

3

0.16

0.18

24.378

29.384

52.238

42.69

938.801

4

0.19

0.21

19.640

23.674

42.086

34.40

950.695

5

0.22

0.24

16.444

19.821

35.238

28.80

958.718

6

0.25

0.27

14.143

17.048

30.307

24.77

964.495

7

0.28

0.3

12.407

14.955

26.586

21.73

968.854

8

0.31

0.33

11.050

13.320

23.679

19.35

972.259

9

0.34

0.36

9.961

12.007

21.345

17.44

974.994

10

0.37

0.39

9.067

10.929

19.430

15.88

977.237

11

0.40

0.42

8.321

10.030

17.830

14.57

979.111

12

0.43

0.45

7.688

9.267

16.474

13.46

980.700

13

0.46

0.48

7.144

8.612

15.309

12.51

982.065

14

0.49

0.51

6.673

8.043

14.299

11.69

983.249

15

0.52

0.54

6.259

7.545

13.413

10.96

984.286

16

0.55

0.57

5.894

7.105

12.631

10.32

985.203

17

0.58

0.6

5.569

6.713

11.935

9.75

986.018

18

0.61

0.63

5.279

6.363

11.311

9.24

986.749

19

0.64

0.66

5.017

6.047

10.750

8.79

987.406

20

0.67

0.69

4.779

5.761

10.241

8.37

988.002

21

0.70

0.72

4.564

5.501

9.779

7.99

988.544

22

0.73

0.75

4.366

5.263

9.356

7.65

989.039

23

0.76

0.78

4.186

5.045

8.969

7.33

989.493

24

0.79

0.81

4.019

4.844

8.612

7.04

989.911

25

0.82

0.84

3.865

4.659

8.283

6.77

990.296

26

0.85

0.87

3.723

4.487

7.978

6.52

990.654

27

0.88

0.9

3.591

4.328

7.694

6.29

990.986

28

0.91

0.93

3.467

4.180

7.430

6.07

991.295

29

0.94

0.96

3.352

4.041

7.184

5.87

991.584

30

0.97

0.99

3.245

3.911

6.953

5.68

991.854

31

1.00

1.02

3.144

3.789

6.737

5.51

992.108

32

1.03

1.05

3.049

3.675

6.534

5.34

992.346

33

1.06

1.08

2.960

3.568

6.342

5.18

992.570

34

1.09

1.11

2.876

3.466

6.162

5.04

992.781

35

1.12

1.14

2.796

3.370

5.991

4.90

992.981

36

1.15

1.17

2.721

3.279

5.830

4.76

993.170

37

1.18

1.2

2.649

3.193

5.677

4.64

993.349

38

1.21

1.23

2.582

3.112

5.532

4.52

993.519

39

1.24

1.26

2.517

3.034

5.394

4.41

993.680

40

1.27

1.29

2.456

2.961

5.263

4.30

993.834

41

1.30

1.32

2.398

2.890

5.138

4.20

993.980

42

1.33

1.35

2.342

2.823

5.019

4.10

994.120

43

1.36

1.38

2.289

2.759

4.906

4.01

994.253

44

1.39

1.41

2.239

2.698

4.797

3.92

994.380

45

1.42

1.44

2.190

2.640

4.693

3.84

994.502

46

1.45

1.47

2.144

2.584

4.593

3.75

994.619

47

1.48

1.5

2.099

2.530

4.498

3.68

994.730

48

1.51

1.53

2.056

2.479

4.407

3.60

994.838

49

1.54

1.56

2.015

2.429

4.319

3.53

994.941

50

1.57

1.59

1.976

2.382

4.234

3.46

995.040

51

1.60

1.62

1.938

2.336

4.153

3.39

995.135

Engineering Table-1F (PPGL)

Export Product: Cold Rolled Zinc-Aluminium-Silicon Alloy Coated Colour Coated Non Alloy Steel Sheets/Strips/Wide Coils (Plain / Corrugated)

Sl. No.

Export Product Thickness Range (mm)

CR Steel Content (kgs) for different thickness of export product and different coating class in gms/m2

 

a

b

 

 

 

40-49

50-59

60-69

70-79

80-89

90-99

100-109

1

0.10

0.12

822.1

801.3

779.8

757.3

734.0

709.6

684.2

2

0.13

0.15

872.8

858.8

844.3

829.5

814.2

798.5

782.3

3

0.16

0.18

901.1

890.5

879.6

868.6

857.3

845.7

833.9

4

0.19

0.21

919.0

910.5

901.9

893.1

884.1

875.0

865.7

5

0.22

0.24

931.5

924.4

917.2

909.9

902.5

895.0

887.3

6

0.25

0.27

940.6

934.5

928.4

922.1

915.8

909.4

902.9

7

0.28

0.30

947.6

942.3

936.9

931.4

925.9

920.4

914.7

8

0.31

0.33

953.1

948.4

943.6

938.8

933.9

929.0

924.0

9

0.34

0.36

957.6

953.3

949.0

944.7

940.3

935.9

931.4

10

0.37

0.39

961.2

957.4

953.5

949.5

945.6

941.6

937.5

11

0.40

0.42

964.3

960.8

957.2

953.6

950.0

946.3

942.7

12

0.43

0.45

967.0

963.7

960.4

957.1

953.8

950.4

947.0

13

0.46

0.48

969.3

966.2

963.2

960.1

957.0

953.9

950.7

14

0.49

0.51

971.2

968.4

965.6

962.7

959.8

956.9

954.0

15

0.52

0.54

973.0

970.3

967.7

965.0

962.3

959.5

956.8

16

0.55

0.57

974.5

972.0

969.5

967.0

964.4

961.9

959.3

17

0.58

0.60

975.9

973.5

971.2

968.8

966.4

964.0

961.5

18

0.61

0.63

977.1

974.9

972.7

970.4

968.1

965.8

963.5

19

0.64

0.66

978.3

976.1

974.0

971.8

969.7

967.5

965.3

20

0.67

0.69

979.3

977.2

975.2

973.2

971.1

969.1

967.0

21

0.70

0.72

980.2

978.3

976.3

974.4

972.4

970.4

968.5

22

0.73

0.75

981.0

979.2

977.3

975.5

973.6

971.7

969.8

23

0.76

0.78

981.8

980.0

978.3

976.5

974.7

972.9

971.1

24

0.79

0.81

982.5

980.8

979.1

977.4

975.7

974.0

972.2

25

0.82

0.84

983.2

981.5

979.9

978.3

976.6

974.9

973.3

26

0.85

0.87

983.8

982.2

980.6

979.0

977.5

975.9

974.3

27

0.88

0.90

984.4

982.8

981.3

979.8

978.3

976.7

975.2

28

0.91

0.93

984.9

983.4

982.0

980.5

979.0

977.5

976.0

29

0.94

0.96

985.4

984.0

982.5

981.1

979.7

978.3

976.8

30

0.97

0.99

985.8

984.5

983.1

981.7

980.3

978.9

977.6

31

1.00

1.02

986.3

985.0

983.6

982.3

980.9

979.6

978.3

32

1.03

1.05

986.7

985.4

984.1

982.8

981.5

980.2

978.9

33

1.06

1.08

987.1

985.8

984.6

983.3

982.1

980.8

979.5

34

1.09

1.11

987.4

986.2

985.0

983.8

982.6

981.3

980.1

35

1.12

1.14

987.8

986.6

985.4

984.2

983.0

981.9

980.7

36

1.15

1.17

988.1

987.0

985.8

984.7

983.5

982.3

981.2

37

1.18

1.20

988.4

987.3

986.2

985.1

983.9

982.8

981.7

38

1.21

1.23

988.7

987.6

986.5

985.4

984.3

983.2

982.1

39

1.24

1.26

989.0

987.9

986.9

985.8

984.7

983.7

982.6

40

1.27

1.29

989.3

988.2

987.2

986.1

985.1

984.1

983.0

41

1.30

1.32

989.5

988.5

987.5

986.5

985.4

984.4

983.4

42

1.33

1.35

989.8

988.8

987.8

986.8

985.8

984.8

983.8

43

1.36

1.38

990.0

989.0

988.0

987.1

986.1

985.1

984.2

44

1.39

1.41

990.2

989.3

988.3

987.4

986.4

985.5

984.5

45

1.42

1.44

990.4

989.5

988.6

987.6

986.7

985.8

984.8

46

1.45

1.47

990.6

989.7

988.8

987.9

987.0

986.1

985.2

47

1.48

1.50

990.8

989.9

989.0

988.1

987.3

986.4

985.5

48

1.51

1.53

991.0

990.1

989.3

988.4

987.5

986.6

985.8

49

1.54

1.56

991.2

990.3

989.5

988.6

987.8

986.9

986.0

50

1.57

1.59

991.3

990.5

989.7

988.8

988.0

987.2

986.3

51

1.60

1.62

991.5

990.7

989.9

989.1

988.2

987.4

986.6

Engineering Table-1F (PPGL)

Export Product: Cold Rolled Zinc-Aluminium-Silicon Alloy Coated Colour Coated Non Alloy Steel Sheets/Strips/Wide Coils(Plain / Corrugated)

Sl. No.

Export Product Thickness (mm)

CR Steel Content (kgs) for different thickness of export product and different coating class in gms/m2

 

a

b

 

 

 

110-119

120-129

130-139

140-149

150-159

160-169

170-179

1

0.10

0.12

657.7

629.9

600.9

570.5

538.7

505.3

470.1

2

0.13

0.15

765.6

748.4

730.7

712.4

693.5

674.0

653.9

3

0.16

0.18

821.8

809.5

796.8

783.8

770.6

757.0

743.0

4

0.19

0.21

856.3

846.7

836.8

826.8

816.6

806.2

795.7

5

0.22

0.24

879.6

871.7

863.7

855.6

847.3

838.9

830.4

6

0.25

0.27

896.4

889.7

883.0

876.1

869.2

862.2

855.0

7

0.28

0.30

909.1

903.3

897.5

891.6

885.6

879.5

873.4

8

0.31

0.33

919.0

913.9

908.8

903.6

898.3

893.0

887.7

9

0.34

0.36

926.9

922.4

917.8

913.2

908.5

903.8

899.0

10

0.37

0.39

933.5

929.4

925.2

921.1

916.8

912.6

908.3

11

0.40

0.42

938.9

935.2

931.4

927.6

923.8

919.9

916.0

12

0.43

0.45

943.6

940.1

936.7

933.2

929.7

926.1

922.5

13

0.46

0.48

947.6

944.4

941.2

937.9

934.7

931.4

928.1

14

0.49

0.51

951.0

948.1

945.1

942.1

939.1

936.0

933.0

15

0.52

0.54

954.0

951.3

948.5

945.7

942.9

940.0

937.2

16

0.55

0.57

956.7

954.1

951.5

948.9

946.2

943.6

940.9

17

0.58

0.60

959.1

956.7

954.2

951.7

949.2

946.7

944.2

18

0.61

0.63

961.2

958.9

956.6

954.2

951.9

949.5

947.2

19

0.64

0.66

963.2

961.0

958.8

956.5

954.3

952.1

949.8

20

0.67

0.69

964.9

962.8

960.7

958.6

956.5

954.4

952.2

21

0.70

0.72

966.5

964.5

962.5

960.5

958.5

956.4

954.4

22

0.73

0.75

967.9

966.0

964.1

962.2

960.3

958.3

956.4

23

0.76

0.78

969.3

967.4

965.6

963.8

961.9

960.1

958.2

24

0.79

0.81

970.5

968.7

967.0

965.2

963.5

961.7

959.9

25

0.82

0.84

971.6

969.9

968.2

966.6

964.9

963.2

961.4

26

0.85

0.87

972.7

971.0

969.4

967.8

966.2

964.5

962.9

27

0.88

0.90

973.6

972.1

970.5

968.9

967.4

965.8

964.2

28

0.91

0.93

974.5

973.0

971.5

970.0

968.5

967.0

965.5

29

0.94

0.96

975.4

973.9

972.5

971.0

969.5

968.1

966.6

30

0.97

0.99

976.2

974.8

973.4

971.9

970.5

969.1

967.7

31

1.00

1.02

976.9

975.5

974.2

972.8

971.5

970.1

968.7

32

1.03

1.05

977.6

976.3

975.0

973.6

972.3

971.0

969.7

33

1.06

1.08

978.3

977.0

975.7

974.4

973.1

971.8

970.5

34

1.09

1.11

978.9

977.6

976.4

975.1

973.9

972.6

971.4

35

1.12

1.14

979.5

978.3

977.0

975.8

974.6

973.4

972.2

36

1.15

1.17

980.0

978.8

977.7

976.5

975.3

974.1

972.9

37

1.18

1.20

980.5

979.4

978.3

977.1

976.0

974.8

973.7

38

1.21

1.23

981.0

979.9

978.8

977.7

976.6

975.5

974.3

39

1.24

1.26

981.5

980.4

979.3

978.3

977.2

976.1

975.0

40

1.27

1.29

982.0

980.9

979.8

978.8

977.7

976.7

975.6

41

1.30

1.32

982.4

981.4

980.3

979.3

978.3

977.2

976.2

42

1.33

1.35

982.8

981.8

980.8

979.8

978.8

977.7

976.7

43

1.36

1.38

983.2

982.2

981.2

980.2

979.2

978.3

977.3

44

1.39

1.41

983.5

982.6

981.6

980.7

979.7

978.7

977.8

45

1.42

1.44

983.9

983.0

982.0

981.1

980.1

979.2

978.3

46

1.45

1.47

984.2

983.3

982.4

981.5

980.6

979.6

978.7

47

1.48

1.50

984.6

983.7

982.8

981.9

981.0

980.1

979.2

48

1.51

1.53

984.9

984.0

983.1

982.2

981.4

980.5

979.6

49

1.54

1.56

985.2

984.3

983.5

982.6

981.7

980.9

980.0

50

1.57

1.59

985.5

984.6

983.8

982.9

982.1

981.2

980.4

51

1.60

1.62

985.8

984.9

984.1

983.3

982.4

981.6

980.8

Engineering Table-1F (PPGL)

Export Product: Cold Rolled Zinc-Aluminium-Silicon Alloy Coated Colour Coated Non Alloy Steel Sheets/Strips/Wide Coils(Plain / Corrugated)

Sl. No.

Export Product Thickness (mm)

CR Steel Content (kgs) for different thickness of export product and different coating class in gms/m2

 

a

b

 

 

 

180-189

190-199

200-209

210-219

220-229

230-239

1

0.10

0.12

433.2

394.2

353.1

309.7

263.8

215.1

2

0.13

0.15

633.1

611.5

589.3

566.2

542.3

517.4

3

0.16

0.18

728.8

714.1

699.1

683.7

667.9

651.6

4

0.19

0.21

784.8

773.8

762.6

751.1

739.4

727.4

5

0.22

0.24

821.7

812.9

803.9

794.8

785.6

776.1

6

0.25

0.27

847.8

840.5

833.0

825.5

817.8

810.1

7

0.28

0.30

867.2

861.0

854.6

848.2

841.7

835.1

8

0.31

0.33

882.3

876.8

871.2

865.6

860.0

854.3

9

0.34

0.36

894.2

889.4

884.5

879.5

874.5

869.5

10

0.37

0.39

904.0

899.6

895.2

890.8

886.3

881.8

11

0.40

0.42

912.1

908.1

904.1

900.1

896.1

892.0

12

0.43

0.45

918.9

915.3

911.7

908.0

904.3

900.6

13

0.46

0.48

924.8

921.5

918.1

914.7

911.3

907.9

14

0.49

0.51

929.9

926.8

923.7

920.5

917.4

914.2

15

0.52

0.54

934.3

931.4

928.5

925.6

922.6

919.7

16

0.55

0.57

938.2

935.5

932.8

930.0

927.3

924.5

17

0.58

0.60

941.7

939.1

936.6

934.0

931.4

928.8

18

0.61

0.63

944.8

942.4

940.0

937.5

935.1

932.6

19

0.64

0.66

947.6

945.3

943.0

940.7

938.4

936.1

20

0.67

0.69

950.1

947.9

945.7

943.6

941.4

939.2

21

0.70

0.72

952.4

950.3

948.2

946.2

944.1

942.0

22

0.73

0.75

954.4

952.5

950.5

948.5

946.6

944.6

23

0.76

0.78

956.4

954.5

952.6

950.7

948.8

946.9

24

0.79

0.81

958.1

956.3

954.5

952.7

950.9

949.1

25

0.82

0.84

959.7

958.0

956.3

954.5

952.8

951.1

26

0.85

0.87

961.2

959.6

957.9

956.3

954.6

952.9

27

0.88

0.90

962.6

961.0

959.4

957.8

956.2

954.6

28

0.91

0.93

963.9

962.4

960.8

959.3

957.8

956.2

29

0.94

0.96

965.1

963.6

962.2

960.7

959.2

957.7

30

0.97

0.99

966.3

964.8

963.4

962.0

960.5

959.1

31

1.00

1.02

967.3

965.9

964.5

963.2

961.8

960.4

32

1.03

1.05

968.3

967.0

965.6

964.3

962.9

961.6

33

1.06

1.08

969.3

968.0

966.6

965.3

964.0

962.7

34

1.09

1.11

970.1

968.9

967.6

966.3

965.1

963.8

35

1.12

1.14

971.0

969.7

968.5

967.3

966.0

964.8

36

1.15

1.17

971.8

970.6

969.4

968.2

967.0

965.8

37

1.18

1.20

972.5

971.3

970.2

969.0

967.9

966.7

38

1.21

1.23

973.2

972.1

971.0

969.8

968.7

967.5

39

1.24

1.26

973.9

972.8

971.7

970.6

969.5

968.4

40

1.27

1.29

974.5

973.5

972.4

971.3

970.2

969.1

41

1.30

1.32

975.1

974.1

973.0

972.0

970.9

969.9

42

1.33

1.35

975.7

974.7

973.7

972.6

971.6

970.6

43

1.36

1.38

976.3

975.3

974.3

973.3

972.3

971.3

44

1.39

1.41

976.8

975.8

974.8

973.9

972.9

971.9

45

1.42

1.44

977.3

976.4

975.4

974.4

973.5

972.5

46

1.45

1.47

977.8

976.9

975.9

975.0

974.1

973.1

47

1.48

1.50

978.3

977.3

976.4

975.5

974.6

973.7

48

1.51

1.53

978.7

977.8

976.9

976.0

975.1

974.2

49

1.54

1.56

979.1

978.3

977.4

976.5

975.6

974.7

50

1.57

1.59

979.5

978.7

977.8

977.0

976.1

975.2

51

1.60

1.62

979.9

979.1

978.3

977.4

976.6

975.7

Engineering Table-1G (PPGL)

Export Product: Cold Rolled Zinc-Aluminium-Silicon Alloy Coated Colour Coated Non Alloy Steel Sheets/Strips/Wide Coils(Plain / Corrugated)

Sl. No.

Export Product Thickness (mm)

Zinc-Aluminium-Silicon Alloy Content (kgs) for different thickness of export product and different coating class in gms/m2

 

a

b

 

 

 

40-49

50-59

60-69

70-79

80-89

90-99

100-109

1

0.10

0.12

76.25

95.01

114.52

134.82

155.96

177.99

200.97

2

0.13

0.15

54.50

67.54

80.94

94.72

108.90

123.50

138.53

3

0.16

0.18

42.41

52.39

62.59

73.01

83.66

94.55

105.69

4

0.19

0.21

34.71

42.79

51.02

59.39

67.92

76.60

85.44

5

0.22

0.24

29.37

36.16

43.06

50.06

57.16

64.37

71.70

6

0.25

0.27

25.46

31.31

37.25

43.26

49.35

55.52

61.77

7

0.28

0.30

22.46

27.61

32.82

38.08

43.41

48.80

54.25

8

0.31

0.33

20.10

24.69

29.33

34.02

38.75

43.53

48.37

9

0.34

0.36

18.19

22.33

26.51

30.73

34.99

39.29

43.63

10

0.37

0.39

16.61

20.38

24.19

28.03

31.90

35.81

39.74

11

0.40

0.42

15.28

18.75

22.24

25.76

29.31

32.89

36.49

12

0.43

0.45

14.15

17.35

20.58

23.83

27.11

30.41

33.73

13

0.46

0.48

13.17

16.15

19.15

22.17

25.21

28.28

31.36

14

0.49

0.51

12.32

15.11

17.91

20.73

23.57

26.42

29.30

15

0.52

0.54

11.58

14.19

16.82

19.46

22.12

24.80

27.49

16

0.55

0.57

10.92

13.38

15.85

18.34

20.85

23.36

25.89

17

0.58

0.60

10.33

12.65

14.99

17.34

19.71

22.08

24.47

18

0.61

0.63

9.80

12.00

14.22

16.45

18.69

20.94

23.20

19

0.64

0.66

9.32

11.42

13.52

15.64

17.77

19.90

22.05

20

0.67

0.69

8.89

10.88

12.89

14.91

16.93

18.97

21.01

21

0.70

0.72

8.49

10.40

12.32

14.24

16.17

18.12

20.07

22

0.73

0.75

8.13

9.96

11.79

13.63

15.48

17.34

19.20

23

0.76

0.78

7.80

9.55

11.31

13.07

14.84

16.62

18.41

24

0.79

0.81

7.49

9.17

10.86

12.56

14.26

15.97

17.68

25

0.82

0.84

7.21

8.83

10.45

12.08

13.72

15.36

17.01

26

0.85

0.87

6.95

8.51

10.07

11.64

13.21

14.79

16.38

27

0.88

0.90

6.70

8.21

9.72

11.23

12.75

14.27

15.80

28

0.91

0.93

6.48

7.93

9.38

10.85

12.31

13.78

15.26

29

0.94

0.96

6.26

7.67

9.08

10.49

11.91

13.33

14.75

30

0.97

0.99

6.06

7.42

8.79

10.15

11.53

12.90

14.28

31

1.00

1.02

5.88

7.20

8.52

9.84

11.17

12.50

13.84

32

1.03

1.05

5.70

6.98

8.26

9.55

10.83

12.13

13.42

33

1.06

1.08

5.54

6.78

8.02

9.27

10.52

11.77

13.03

34

1.09

1.11

5.38

6.59

7.79

9.01

10.22

11.44

12.66

35

1.12

1.14

5.23

6.41

7.58

8.76

9.94

11.12

12.31

36

1.15

1.17

5.09

6.23

7.38

8.52

9.67

10.82

11.98

37

1.18

1.20

4.96

6.07

7.19

8.30

9.42

10.54

11.67

38

1.21

1.23

4.84

5.92

7.00

8.09

9.18

10.27

11.37

39

1.24

1.26

4.72

5.77

6.83

7.89

8.95

10.02

11.09

40

1.27

1.29

4.60

5.63

6.67

7.70

8.74

9.78

10.82

41

1.30

1.32

4.50

5.50

6.51

7.52

8.53

9.54

10.56

42

1.33

1.35

4.39

5.37

6.36

7.34

8.33

9.32

10.32

43

1.36

1.38

4.29

5.25

6.21

7.18

8.14

9.11

10.08

44

1.39

1.41

4.20

5.14

6.08

7.02

7.97

8.91

9.86

45

1.42

1.44

4.11

5.03

5.95

6.87

7.79

8.72

9.65

46

1.45

1.47

4.02

4.92

5.82

6.72

7.63

8.53

9.44

47

1.48

1.50

3.94

4.82

5.70

6.59

7.47

8.36

9.25

48

1.51

1.53

3.86

4.72

5.59

6.45

7.32

8.19

9.06

49

1.54

1.56

3.78

4.63

5.48

6.32

7.17

8.03

8.88

50

1.57

1.59

3.71

4.54

5.37

6.20

7.03

7.87

8.71

51

1.60

1.62

3.64

4.45

5.27

6.08

6.90

7.72

8.54

Engineering Table-1G (PPGL)

Export Product: Cold Rolled Zinc-Aluminium-Silicon Alloy Coated Colour Coated Non Alloy Steel Sheets/Strips/Wide Coils(Plain / Corrugated)

Sl. No.

Export Product Thickness (mm)

Zinc-Aluminium-Silicon Alloy Content (kgs) for different thickness of export product and different coating class in gms/m2

 

a

b

 

 

 

110-119

120-129

130-139

140-149

150-159

160-169

170-179

1

0.10

0.12

224.97

250.05

276.28

303.76

332.57

362.81

394.58

2

0.13

0.15

154.01

169.97

186.43

203.41

220.93

239.03

257.73

3

0.16

0.18

117.09

128.75

140.68

152.90

165.41

178.23

191.36

4

0.19

0.21

94.44

103.61

112.96

122.48

132.19

142.08

152.17

5

0.22

0.24

79.14

86.69

94.36

102.16

110.08

118.13

126.31

6

0.25

0.27

68.10

74.52

81.03

87.62

94.31

101.09

107.96

7

0.28

0.30

59.77

65.35

70.99

76.71

82.49

88.34

94.26

8

0.31

0.33

53.25

58.18

63.17

68.21

73.30

78.45

83.65

9

0.34

0.36

48.01

52.43

56.90

61.41

65.96

70.55

75.19

10

0.37

0.39

43.71

47.72

51.76

55.84

59.95

64.10

68.28

11

0.40

0.42

40.12

43.78

47.47

51.19

54.94

58.72

62.53

12

0.43

0.45

37.08

40.45

43.84

47.26

50.71

54.18

57.68

13

0.46

0.48

34.46

37.58

40.73

43.89

47.08

50.29

53.52

14

0.49

0.51

32.19

35.10

38.03

40.97

43.94

46.92

49.93

15

0.52

0.54

30.20

32.92

35.66

38.42

41.19

43.98

46.79

16

0.55

0.57

28.44

31.00

33.57

36.16

38.76

41.38

44.01

17

0.58

0.60

26.87

29.29

31.72

34.16

36.61

39.07

41.55

18

0.61

0.63

25.47

27.76

30.05

32.36

34.68

37.01

39.35

19

0.64

0.66

24.21

26.38

28.56

30.74

32.94

35.15

37.37

20

0.67

0.69

23.07

25.13

27.20

29.28

31.37

33.47

35.58

21

0.70

0.72

22.03

23.99

25.97

27.95

29.95

31.95

33.96

22

0.73

0.75

21.08

22.96

24.84

26.74

28.64

30.55

32.47

23

0.76

0.78

20.20

22.00

23.81

25.63

27.45

29.28

31.11

24

0.79

0.81

19.40

21.13

22.86

24.60

26.35

28.10

29.86

25

0.82

0.84

18.66

20.32

21.98

23.66

25.33

27.02

28.71

26

0.85

0.87

17.97

19.57

21.17

22.78

24.40

26.02

27.64

27

0.88

0.90

17.33

18.87

20.42

21.97

23.52

25.08

26.65

28

0.91

0.93

16.74

18.23

19.72

21.21

22.71

24.22

25.73

29

0.94

0.96

16.19

17.62

19.06

20.51

21.95

23.41

24.87

30

0.97

0.99

15.67

17.05

18.45

19.84

21.25

22.65

24.06

31

1.00

1.02

15.18

16.52

17.87

19.22

20.58

21.94

23.31

32

1.03

1.05

14.72

16.02

17.33

18.64

19.96

21.28

22.60

33

1.06

1.08

14.29

15.56

16.82

18.09

19.37

20.65

21.93

34

1.09

1.11

13.88

15.11

16.34

17.58

18.82

20.06

21.30

35

1.12

1.14

13.50

14.69

15.89

17.09

18.29

19.50

20.71

36

1.15

1.17

13.14

14.30

15.46

16.63

17.80

18.97

20.15

37

1.18

1.20

12.79

13.92

15.06

16.19

17.33

18.47

19.62

38

1.21

1.23

12.47

13.57

14.67

15.78

16.89

18.00

19.11

39

1.24

1.26

12.16

13.23

14.30

15.38

16.46

17.55

18.63

40

1.27

1.29

11.86

12.91

13.96

15.01

16.06

17.12

18.18

41

1.30

1.32

11.58

12.60

13.62

14.65

15.68

16.71

17.74

42

1.33

1.35

11.31

12.31

13.31

14.31

15.31

16.32

17.33

43

1.36

1.38

11.06

12.03

13.01

13.98

14.97

15.95

16.93

44

1.39

1.41

10.81

11.76

12.72

13.67

14.63

15.59

16.56

45

1.42

1.44

10.58

11.51

12.44

13.38

14.31

15.25

16.20

46

1.45

1.47

10.35

11.26

12.18

13.09

14.01

14.93

15.85

47

1.48

1.50

10.14

11.03

11.92

12.82

13.72

14.62

15.52

48

1.51

1.53

9.93

10.81

11.68

12.56

13.44

14.32

15.20

49

1.54

1.56

9.73

10.59

11.45

12.31

13.17

14.03

14.90

50

1.57

1.59

9.54

10.38

11.22

12.07

12.91

13.76

14.60

51

1.60

1.62

9.36

10.18

11.01

11.83

12.66

13.49

14.32

Engineering Table-1G (PPGL)

Export Product: Cold Rolled Zinc-Aluminium-Silicon Alloy Coated Colour Coated Non Alloy Steel Sheets/Strips/Wide Coils(Plain / Corrugated)

Sl. No.

Export Product Thickness (mm)

Zinc-Aluminium-Silicon Alloy Content (kgs) for different thickness of export product and different coating class in gms/m2

 

a

b

 

 

 

180-189

190-199

200-209

210-219

220-229

230-239

1

0.10

0.12

428.01

463.24

500.40

539.67

581.23

625.28

2

0.13

0.15

277.06

297.05

317.75

339.17

361.38

384.41

3

0.16

0.18

204.82

218.62

232.78

247.30

262.20

277.50

4

0.19

0.21

162.46

172.96

183.66

194.59

205.74

217.12

5

0.22

0.24

134.62

143.07

151.66

160.40

169.29

178.32

6

0.25

0.27

114.93

121.99

129.16

136.43

143.81

151.29

7

0.28

0.30

100.26

106.33

112.47

118.69

124.99

131.37

8

0.31

0.33

88.91

94.23

99.60

105.04

110.53

116.09

9

0.34

0.36

79.87

84.60

89.38

94.20

99.07

103.99

10

0.37

0.39

72.50

76.76

81.05

85.39

89.76

94.18

11

0.40

0.42

66.37

70.25

74.15

78.09

82.05

86.05

12

0.43

0.45

61.20

64.75

68.33

71.93

75.56

79.22

13

0.46

0.48

56.78

60.06

63.36

66.68

70.03

73.40

14

0.49

0.51

52.95

56.00

59.06

62.14

65.24

68.37

15

0.52

0.54

49.61

52.45

55.31

58.18

61.07

63.98

16

0.55

0.57

46.66

49.32

52.00

54.69

57.40

60.13

17

0.58

0.60

44.05

46.55

49.07

51.60

54.15

56.71

18

0.61

0.63

41.71

44.07

46.45

48.84

51.25

53.66

19

0.64

0.66

39.60

41.85

44.10

46.36

48.64

50.92

20

0.67

0.69

37.70

39.83

41.97

44.12

46.28

48.45

21

0.70

0.72

35.98

38.00

40.04

42.09

44.14

46.21

22

0.73

0.75

34.40

36.34

38.28

40.23

42.19

44.16

23

0.76

0.78

32.96

34.81

36.67

38.53

40.41

42.29

24

0.79

0.81

31.63

33.40

35.19

36.97

38.77

40.57

25

0.82

0.84

30.41

32.11

33.82

35.53

37.26

38.99

26

0.85

0.87

29.27

30.91

32.55

34.20

35.86

37.52

27

0.88

0.90

28.22

29.80

31.38

32.97

34.56

36.16

28

0.91

0.93

27.24

28.76

30.29

31.82

33.36

34.90

29

0.94

0.96

26.33

27.80

29.27

30.75

32.23

33.72

30

0.97

0.99

25.48

26.89

28.32

29.75

31.18

32.61

31

1.00

1.02

24.68

26.05

27.43

28.81

30.19

31.58

32

1.03

1.05

23.92

25.25

26.59

27.93

29.27

30.61

33

1.06

1.08

23.22

24.51

25.80

27.10

28.40

29.70

34

1.09

1.11

22.55

23.80

25.06

26.32

27.58

28.84

35

1.12

1.14

21.92

23.14

24.36

25.58

26.80

28.03

36

1.15

1.17

21.33

22.51

23.69

24.88

26.07

27.27

37

1.18

1.20

20.76

21.91

23.07

24.22

25.38

26.54

38

1.21

1.23

20.23

21.35

22.47

23.60

24.72

25.85

39

1.24

1.26

19.72

20.81

21.90

23.00

24.10

25.20

40

1.27

1.29

19.24

20.30

21.37

22.44

23.51

24.58

41

1.30

1.32

18.78

19.82

20.86

21.90

22.94

23.99

42

1.33

1.35

18.34

19.35

20.37

21.38

22.40

23.43

43

1.36

1.38

17.92

18.91

19.90

20.90

21.89

22.89

44

1.39

1.41

17.52

18.49

19.46

20.43

21.40

22.38

45

1.42

1.44

17.14

18.08

19.03

19.98

20.93

21.89

46

1.45

1.47

16.77

17.70

18.62

19.55

20.48

21.42

47

1.48

1.50

16.42

17.33

18.23

19.14

20.05

20.97

48

1.51

1.53

16.09

16.97

17.86

18.75

19.64

20.53

49

1.54

1.56

15.76

16.63

17.50

18.37

19.25

20.12

50

1.57

1.59

15.45

16.30

17.16

18.01

18.87

19.72

51

1.60

1.62

15.15

15.99

16.82

17.66

18.50

19.34