Marble
Quota for 6 Lakh tonnes for FY 2013-14 Announced, Allocation on Turnover and
Number of Gang Saws
[DGFT Notification No. 37 dated 26th August
2013]
Sub.: Policy for issue of import licenses of Rough
Marble and Travertine Blocks for the Financial year 2013-14.
In exercise of powers conferred under section 5 of the
Foreign Trade (Development and Regulation) Act, 1992 as amended, read with
paragraph 2.1 of the Foreign Trade Policy, 2009-14, the Central Government
hereby makes the following amendments in Schedule-I (Imports) to the ITC (HS)
Classifications of Export and Import Items:
2. Import
Licensing Note No. (2) inserted at the end of Chapter 25, will be amended to
read as : “Import of rough marble blocks will be subject to conditions laid
down in Notification No.37 dated 26th August, 2013.”
3. Conditions
for import of marble.
(A) The
following Policy provisions will be applicable for import of Rough Marble
Blocks and Travertine for the financial year 2013-14. This will
supersede earlier Policy /Guidelines for issue of import licenses of Rough
Marble Blocks.
(B) Attention is
invited to ITC HS Codes 25151100 and 25151210 indicated in Schedule-1 (Imports)
of ITC (HS) Classifications of Export and Import Items. As per the provisions
contained therein, import of Marble and Travertine – Crude or Roughly trimmed
and merely cut, by sawing or otherwise, into blocks of a rectangular (including
square) shape is restricted and subject to import licensing procedures.
(C) The
applications for import license for import of rough marble blocks and
travertine under the above mentioned ITC HS Codes will be considered in the
following manner: -
I. Eligibility of the units will be decided based on
the following three criteria:
(a) Units who
have installed marble gangsaw machine (except 100% EOUs and units in SEZ) on or
prior to 31.3.2013. The marble gangsaw machine shall be in the name of the
applicant only. No gangsaw on “Lease Basis” shall be considered for the purpose
of allocation of import entitlement.
(b) The Units
should have been in operation for 5 years on or prior to 31.3.2013.
(c) All eligible
units as per (a) above should have cumulative turnover of atleast Rupees Five
crores ( Rs 5 Crores) during the 5 years period i.e financial years 2007-08 to
2011-12 irrespective of whether it is from domestic or foreign sources in
respect of processed marble slabs/tiles only.
II. Floor
Price-
Licenses for import of crude or roughly trimmed marble
and travertine blocks or merely cut, by sawing or otherwise into blocks of a
rectangular (including square) shape shall be subject to a floor price of US$
325 per Metric Tonne (MT), which shall be endorsed on all licenses.
III. Entitlement:
The total import of Rough Marble and Travertine blocks
under ITC HS Codes 25151100 and 25151210 will be subject to a ceiling of 6 lakh
MT for the whole of the licensing year, 2013-14. Eligible units will be
entitled for an import license on the basis of cumulative turnover ( indigenous
or foreign) of atleast Rupees 5 crores of processed marble slabs/tiles only,
over the previous five financial years 2007-08 to 2011-12. The quantity so
calculated will however be subject to the overall ceiling of 3000 MT for the
first gang saw and 1500 MT for every subsequent gang saw.
IV. Actual User
Condition:
All licenses shall be subject to actual user
condition. Modalities for submitting hard copies of the applications is
attached as Annexure 1 to this notification.
V. Monthly
Return
License holders shall file monthly returns regarding
imports made by them, to the concerned Regional Authority of DGFT by the 15th
of each succeeding month in which license is obtained (for example if a license
is obtained on 13th September, the license holder will file monthly
return for imports made in September by 15th of October and for each
month thereafter by the 15th ). This is a mandatory requirement.
VI. Validity of
Import licences
Licenses for Import of Marble and Travertine will have
a validity upto 30th September 2014.
4. Effect of this notification
Import policy of Rough Marble and Travertine blocks
for the year 2013-14 has been notified with a quota of 6 lakh MT and an MIP of
US$ 325 per MT.
Annexure-1 to Notification No: 37 (RE-2013)/2009-14
Dated: 26th August,2013
Modalities for submitting applications for grant of
quota for import of rough marble blocks
1. Eligible
applicants will submit hard copies of their application, in the relevant Aayaat
Niryaat Form, along with the documents prescribed therein, to concerned RA for
import of rough marble blocks for the financial year 2013-14. RA will then
forward the applications to DGFT HQ for scrutiny and allocation of quota.
Calendar of events is attached as Annexure 2 to this Notification.
2. The following
conditions would need to be followed and documentary proof submitted to
concerned RA alongwith the application for grant of quota:-
(a) The Marble
gangsaw in the Unit should be in the name of the Unit and established on or
prior to 31.3.2013, as certified by State Industry Department (District
Industry Centre). The gang saw should not be ‘on Lease’ from any other party.
The marble gangsaw machine should have linear movement and should have minimum
60 steel blades impregnated with diamond segments and be used only for cutting
marble blocks into slabs;
(b) SSI/SIA
Registration Certificate should show the Unit being in operation on or prior to
31.3.2008;
(c) The list of
equipments / capital goods (other than Marble gangsaw) set up by the applicant
in the Unit for processing marble slabs / tiles should be prior to 31.3.2008,
as per Balance Sheet as on 31.3.2008, duly certified by a Chartered Accountant;
(d) Income Tax
Return for the financial year 2007-08 indicating processing of marble by the
Unit duly certified by a Chartered Accountant;
(e) CA
Certificate indicating domestic/foreign sales turnover of marble slabs / tiles
of years 2007-08, 2008-09, 2009-10 , 2010-11 and 2011-12; and
(f) A copy of
Chartered Accountant certified statement of accounts, filed along with Balance
Sheet to Income Tax authorities for each of the years i.e. 2007-08, 2008-09,
2009-10 , 2010-11 and 2011-12 (in order to prove cumulative turnover from
domestic or foreign sources) of marble slabs / tiles of atleast Rs. 5 crore in
the last 5 years).
(g) The sale
against Form H and other relevant Forms, job work income earned by any unit
sawing marble blocks of third parties into slabs/tiles and the amount of excise
duty, service tax and sales tax/VAT paid on such indigenous sales turnover of
marble slabs/tiles may also be included for calculating indigenous sales
turnover of the applicant. An applicant would need to submit certified copies
of VAT/Sales Tax returns filed by the applicant for each of the 5 financial
years indicating the indigenous sales turnover of marble slabs/tiles alongwith
the income tax returns for the same period. No trading turnover shall be
considered.
(h) With regard
to calculation of indigenous sales turnover, it is clarified that the turnover
will include the net sales after deducting the sales returns from the gross
sales. It is also clarified that the turnover of the applicant only shall be
taken into consideration and the turnover of group concerns/ sister concerns/
subsidiaries etc. shall not be counted for calculating the turnover.
(i) The
applicant must not be on DEL (Denied Entities List).
(j) In case any
applicant/ firm is found to have furnished wrong/ false information or made any
misrepresentation, then it shall be debarred from the allocation for import of
marble and also liable for penal action under the provisions of FTD&R Act
1992, as amended.
3. The last
date for receipt of hard copy of application with complete documents with RA
shall be 5th September, 2013.
Annexure-2 to Notification No: 37 (RE-2013)/2009-14
Dated: 26th August,2013
|
Calendar of Events |
||
|
1. |
Notification to be issued on |
26th August, 2013 |
|
2. |
Receipt of Application in RA |
Upto 5th September, 2013 |
|
3. |
Forwarding of Applications to DGFT HQ by RA’s |
Upto 9th September, 2013 |
|
4. |
Declaration of Allocation |
19th September, 2013 |
5 Issuance of Licences 20th
to 25th September, 2013