Aluminium Non Stick Utensils SION Notified

[DGFT Public Notice No. 35 dated 21st January 2010]

Subject: Amendments/corrections in SION C-23 and C-2046.

In exercise of the powers conferred under Paragraph 2.4 of the Foreign Trade Policy, 2004-09 and Paragraph 1.1 of the Handbook of Procedures (Vol.1), the Director General of Foreign Trade hereby makes the following amendments/corrections in the Handbook of Procedures, (Vol.2), 2009-2014, as amended from time to time.

2.   In the statement of Standard Input Output Norms (SION) as contained in the Handbook of Procedures (Vol.2), 2009-2014, as amended from time to time, amendments/corrections at appropriate places as mentioned in ANNEXURE "A” and ANNEXURE "B” to this Public Notice are made. 

This issues in the public interest.

Annexure “A” to the Public Notice No. 35(RE-2010)/2009-2014 Dated: 21.01.2010

Engineering Products

Amendments/Corrections/Modification

SION at Sl. No. C- 23

C-23

Aluminium Utensils with interior PTFE Coating & Exterior Coating material as Silicon and or PTFE base (Non Stick) with/without handle(less than 40 micron thickness of PTFE Non-Stick Coating)

1 Kg.

1.Aluminium Scrap

OR

Aluminium Ingots

2. PTFE Non-Stick Coating material

3. High Temp. Resistance Coating material as Silicon and/or PTFE Base

4. Bakelite Moulding Powder

1.15 Kgs./kg. content of Aluminium in the export product.

1.10 Kgs./kg content of Aluminium in the export product

0.128 Ltr./sq.mtr. of internal coating area

0.128 Ltr./sq.mtr. of external coating area

1.05 Kgs./kg content in the export product

Note:1. Item No.4 to be allowed only if exported with Bakelite handle.

2. Item No.3 will be allowed only if export product is painted.

Annexure “B” to the Public Notice No. 35(RE-2010)/2009-2014 Dated: 21.01.2010

Engineering Products

Amendments/Corrections/Modification

SION at Sl. No. C- 2046

C-2046

Aluminium Non Stick Utensils with interior Three Layer PTFE Coating of 40 micron & Exterior Coating Material as Silicon and or PTFE base(Non Stick) with/without handle

1 Kg.

1.Aluminium Scrap
OR

Aluminium Ingots
OR

Aluminium Circles
OR

Uncoated Aluminium Utensils

2. PTFE Non-Stick Coating material

3. High Temp. Resistance Coating material as Silicon and/or PTFE Base

4. Bakelite Moulding Powder

5. Stainless Steel Handles

6. Aluminium Rivets

1.15 Kgs./kg content of Aluminium in the export product.

1.10 Kgs./kg content of Aluminium in the export product

1.07 Kgs./kg content of Aluminum in the export product

Net to net basis

0.403 Ltr./sq.mtr. of internal coating area

0.128 Ltr./sq.mtr. of external coating area

1.05 Kgs./kg. content in the export product

Net to net

Net to Net

Note: 1. Item No.3 will be allowed only if export product is painted.

2. Item No.4 will be allowed if exported with Bakelite Handle.

3. Item No.5 will be allowed only if exported with Stainless Steel Handles.