Aluminium and Aluminium Alloy Products (Quality Control) Order, 2025
Notified to Supersede 2024 Order Implementation from 1 Oct. 2025
·
R&D Window of 200 kg Opened
[DPIIT
Order S.O. 2021(E) dated 5 May 2025]
S.O. 2021(E). In exercise of the powers
conferred section 16 read with section 17 and sub-section (3) of section 25 of
the Bureau of Indian Standards Act, 2016 (11 of 2016) and in supersession of
the Aluminium and Aluminium Alloy Products (Quality Control) Order, 2024,
except as respects things done or omitted to be done before such supersession,
the Central Government, after consulting the Bureau of Indian Standards, is of
the opinion that it is necessary or expedient so to do in the public interest, hereby
makes the following Order, namely:-
1.
Short title and commencement. (1) This Order may be called the Aluminium and
Aluminium Alloy Products (Quality Control) Order, 2025.
It shall come into force with effective
from the 1st day of October, 2025.
2.
Compulsory use of Standard Mark. Goods or articles specified in column (2) of the Table
below shall conform to the corresponding Indian Standard given in column (3) of
the Table and shall bear the Standard Mark under a license from the Bureau as
per Scheme-I of Schedule-II of the Bureau of Indian Standards (Conformity
Assessment) Regulations, 2018:
Provided that nothing in this Order
shall apply to goods or articles manufactured domestically for export:
Provided further that the micro
enterprises and small enterprises, as defined under the Micro, Small and Medium
Enterprises Development Act, 2006 (27 of 2006) shall conform to such Indian
Standards from the date specified in the corresponding entry under columns and
(7) of the Table and for general (other than micro and small enterprises) shall
conform to such Indian Standards from the date specified in the corresponding
entry under column (5) respectively:
Provided also
that nothing in this Order shall apply to the goods or articles imported up to
two hundred kilograms for the purpose of research and development by
manufacturers of Aluminium products per year with the condition that,
(a) such imported
goods and articles shall not be sold commercially, and shall be disposed of as
a scrap; and
(b) the
manufacturer shall maintain year-wise record of such imported goods or articles
and furnish the same to the Central Government on in its letter head duly
signed by its authorised signatory.
3.
Certification and enforcement authority.The Bureau shall be the certifying and
enforcing authority for the goods or articles specified in the Table.
4.
Penalty for contravention.
Any person who contravenes the provisions of this order shall be punishable
under the provisions of the Bureau of Indian Standards Act, 2016.
TABLE
|
Sl. No. |
Goods or articles |
Indian Standard |
Title of Indian Standard |
Date of implementation in
general (other than micro and small enterprises) |
Date of implementation for
micro enterprises |
Date of implementation for
small enterprises |
|
(1) |
(2) |
(3) |
(4) |
(5) |
(6) |
(7) |
|
1. |
Aluminium
and aluminium alloy products |
7092(Part1):1992 |
Aluminium
alloy tubes for irrigation purposes welded tubes |
1st
October, 2025 |
1st
April, 2026 |
1st
January, 2026 |
|
2. |
7092(Part2):1987 |
Aluminium
alloy tubes for irrigation purposes welded tubes |
||||
|
3. |
5485:1997 |
EC
grade aluminium rod produced by continuous casting and rolling |
||||
|
4. |
733:1983 |
Wrought
aluminium and aluminium alloy bars, rods and sections (for general
engineering purpose) |
||||
|
5. |
734:1975 |
Wrought
aluminium and aluminium alloys, forging stock and forgings for general
engineering purposes. |
||||
|
6. |
736:1986 |
Wrought
aluminium and aluminium alloy plate for general engineering purposes |
||||
|
7. |
737:2008 |
Wrought
aluminium and aluminium alloy sheets and strip for general engineering
purposes |
||||
|
8. |
739:1992 |
Wrought
aluminium and aluminium alloy wire for general engineering purposes |
||||
|
9. |
740:1977 |
Wrought
aluminium and aluminium alloy rivet stock for general engineering purposes. |
||||
|
10. |
5082:1998 |
Wrought aluminium and aluminium alloy bars, rods,
tubes, sections, plates and sheets for electrical appliances |
||||
|
11. |
16011:2012 |
Aluminium
and aluminium alloy foil for pharmaceutical packaging |
||||
|
12. |
17682:2021 |
Aluminium
composite panel |
||||
|
13. |
1285:2002 |
Wrought aluminium and aluminium alloys-extruded
round tube and hollow section for general engineering purpose |
||||
|
14. |
2067:1975 |
Wrought
aluminium wire for electrical purposes |
||||
|
15. |
21:1992 |
Wrought
aluminium and aluminium Alloys for
manufacture of utensils |
||||
|
16. |
1254:2007 |
Corrugated
aluminium sheet |
||||
|
17. |
7902:2001 |
Aluminium
alloy forging stock and forgings (alloy 24343) for aerospace appliances |
Note:-
For the purposes
of this Table,
the latest version
of Indian Standards
including the amendments issued
thereof, as notified by the Bureau from time to time shall apply.
[F. No. P-29026/7/2023-LEI]