[MHI Notification S.O. 3318(E) dated 18 July, 2025]
1.
In partial modification of the PM Electric Drive Revolution in Innovative Vehicle Enhancement (PM E-DRIVE)
Scheme which was notified by Ministry
of Heavy Industries vide S.O.4259
(E) dated 29th
September 2024, the following amendments are made with effect
from date of its publication in the Official
Gazette: -
2. Annexure-6 of the notification, regarding Phased Manufacturing Programme (PMP) for EV Public Charging
Stations for eligibility under PM E-DRIVE
scheme is replaced
with attached Annexure-6.
|
Sr. No. |
EVPCS PMP Component Description |
Implemen-tation Date |
PMP Requirement |
|
|
1 |
Charger
Enclosure/Panels |
A |
Manufacturing of Charger Enclosure / Panels which
at least includes sheet metal pressing, powder coating, painting, cutting, welding, fitment
of door, hinges,
gaskets, fitment of mounting racks/
plates, connectors, shall
be domestically performed. |
|
|
2 |
Internal Wiring Harness |
A |
Manufacturing of Internal
Wiring Harness
which at least
includes fitment of cable
trays, DIN rail,
insulation, wires, connectors, protective sleeves
shall be domestically performed. |
|
|
3 |
IS/IEC
60309 Connector |
A |
Manufacturing of IS/IEC 60309 connector which at least
includes connector housing
moulding, contact pin fitment
shall be domestically performed. |
|
|
4 |
Software/Mobile Application for OCPP and
CMS (Central Server) |
A |
It shall be demonstrated that the software is indigenously developed, and indigenous source code development process / activity shall be demonstrated. |
|
|
5 |
Auxiliary Power Supply,
SMPS |
F |
Manufacturing of Auxiliary Power
Supply, SMPS which at least includes assembly of electronic components/ semiconductors on the PCB, wiring
and crimping, connector fitment, heat- sink
fitment, enclosure fitment, software/firmware flashing shall be domestically performed. |
|
|
6(a) |
AC Energy Meter |
B |
Manufacturing of AC Energy
Meter which at least includes assembly of electronic components/semiconductors
on the PCB, wiring
and crimping, connector fitment, heat- sink fitment, enclosure fitment, software/firmware flashing shall
be domestically performed. |
|
|
6(b) |
DC Energy Meter |
F |
Manufacturing of DC Energy
Meter which at least includes assembly of electronic components/semiconductors on the PCB, wiring and crimping, connector fitment, heat- sink fitment, enclosure fitment, software/firmware flashing shall
be domestically performed. |
|
|
7(a) |
RFID |
B |
Manufacturing of RFID which at least includes assembly of electronic components/semiconductors on the PCB, wiring
and crimping, connector fitment, antenna
fitment, enclosure fitment,
software/firmware flashing shall be domestically performed. |
|
|
7(b) |
HMI/Display |
F |
Manufacturing of HMI/Display which
at least includes integration of assembled electronic PCB (PCBA), LCD/LED display
fitment, wiring, connector fitment, heat- sink fitment, enclosure fitment, software/firmware flashing shall be domestically performed. |
|
|
8 |
Input
Switchgears like RCD, Fuses, SPD, MCB,
MPCB etc. |
B |
Manufacturing of Input
switchgears which
at least includes assembly of housing, enclosure, screws,
wires, coils, metallic/ magnetic strips,
operating handle shall
be domestically performed. |
|
|
9(a) |
Output
Switchgear - AC Contactors |
B |
Manufacturing of Output switchgears AC at least
includes housing, enclosure, screws, wires, coils, metallic/ magnetic strips,
operating handle shall
be domestically performed. |
|
|
9(b) |
Output
Switchgears like DC Contactors, Relays, Voltage/Current Isolator, Fuses
etc. |
F |
Manufacturing of Output switchgears DC at least includes assembly of housing, enclosure, screws,
wires, coils, metallic/ magnetic strips,
operating handle shall
be domestically performed. |
|
|
10(a) |
AC Charging Gun Type 2 |
C |
Manufacturing of Charging Gun-Type 2 which at least includes connector housing
fitment, contact pin fitment, cable
integration shall be domestically performed. |
|
|
10(b) |
DC Charging Gun CCS2 |
D |
Manufacturing of DC Charging
Gun CCS2 which
at least includes connector housing
fitment, contact pin fitment, cable
integration shall be domestically performed. |
|
|
11 |
Charger
Controllers: Electronic Controllers for communication with EV, Charge
Control, backend communication and other functions |
D |
Manufacturing of Charger
Controllers which at least includes assembly of electronic components/ semiconductors on the PCB, wiring
and crimping, connector fitment, heat- sink
fitment, enclosure fitment, software/firmware flashing shall be domestically performed. |
|
|
12 |
Power
Electronics/Power Modules (AC to DC Convertor) |
G |
Manufacturing of AC to DC Convertor which at least
assembly of electronic components/semiconductors on the PCB, wiring and crimping, connector fitment, heat- sink fitment, enclosure fitment, software/firmware flashing shall
be domestically performed. |
|
|
Code |
Effective date
of indigenisation of EVPCS
PMP components |
|||
|
A |
w.e.f. 1st December 2021 |
|||
|
B |
w.e.f. 1st July
2022 |
|||
|
C |
w.e.f. 1st January 2023 |
|||
|
D |
w.e.f. 1st June
2024 |
|||
|
E |
w.e.f. 1st December 2024 |
|||
|
F |
w.e.f. 1st June
2025 |
|||
|
G |
w.e.f. 1st December 2025 |
|||
Additional Conditions of EVPCS PMP
1. EV
Public Charging Station (EVPCS) shall comply with PMP as prevailing
on
the date of the purchase order as per above, at the time of supply of each lot being
supplied under PM E-Drive Scheme.
2. EVPCS shall comply
with the technical
requirements as per IS:17017 (as amended from time to time), as tested and certified by the testing agency
of MHI.
3. Import of EVPCS PMP components in CKD form (from single
supplier) shall not be permitted.
4. Definition of manufacture shall be as defined in CGST Act 2017.
5. This PMP is also applicable to Electric
Vehicle Public Charging Stations
(EVPCS) under FAME-II Scheme which are yet to be supplied.
[F. No. 24(2)/PMED/2024-AEI(29903)]