Cross Recessed and other Screws
under Compulsory BIS Certification from July 2025 Nine Months after
Notification
· Restriction
to Apply on both Imports and Domestic Industry, Exports Exempted
[DPIIT Order S.O. 4099(E) dated 17th
September 2024]
S.O.
4099(E).In exercise of
the powers conferred by section 16 of the Bureau of Indian Standards Act, 2016
(11 of 2016), the Central Government, after consulting the Bureau of Indian
Standards, is of the opinion that it is necessary or expedient so to do in the
public interest, hereby makes the following Order, namely :-
1. Short
title and commencement.-(1) This Order may be called the Cross Recessed
Screws (Quality Control) Order, 2024.
(2) It shall come
into force on the date of its publication in the Official Gazette.
2. Compulsory
use of Standard Mark.-Goods or articles specified in column (2) of the
Table shall conform to the corresponding Indian Standard specified in column
(3) of the Table and shall bear the Standard Mark under a license from the
Bureau as per Scheme-I of Schedule-II to the Bureau of Indian Standards
(Conformity Assessment) Regulations, 2018.
Provided that
nothing in this Order shall apply to,-
(a) goods or
articles manufactured domestically for export;
(b) goods or
articles imported as a part of any finished good or sub-assembly or component;
(c) goods or
articles imported by domestic manufacturer for manufacturing products for
export;
Provided
further that the micro enterprise and small enterprise, as defined under the
Micro, Small and Medium Enterprises Development Act, 2006 (27 of 2006) shall
conform to such Indian Standards from the date specified on the corresponding
entry under columns (6) and (7) of the Table respectively:
Provided also
that nothing in this Order shall apply to goods or articles manufactured
domestically by an enterprise, registered under "Udyam
portal" of the Ministry of Micro, Small and Medium Enterprises, wherein
the investment in plant and machinery or equipment at original cost does not
exceed twenty-five lakh rupees and the turnover does not exceed two crore
rupees for the previous financial year as certified by a Chartered Accountant
shall be exempted from implementation of the relevant Quality Control Order.
Provided that
nothing in this Order shall apply to the goods or articles imported up to two
hundred kilograms for the purpose of research and development by manufacturers
of crossed recessed screws (hereafter referred as OEMs) per year and such imported
goods and articles shall not be sold commercially and can be disposed of as a
scrap with the condition that the OEMs shall maintain financial year-wise
record of such goods or articles and furnish the same, if so desired by
Government authorities in its letter head duly signed by its authorized
signatory.
3. Certification
and enforcement authority.-The Bureau shall be the certifying and enforcing
authority for the goods or articles specified in column (2) of the Table.
4. Penalty
for Contravention-Any
person who contravenes the provisions of this Order shall be punishable under
the provisions of the Bureau of Indian Standards Act, 2016.
|
Table |
|||||||
|
Sl.No. |
Goods
or Articles |
Indian
Standard |
Title
of Indian Standard |
Date
of implementation in General (other than Micro and Small Enterprises) |
Date
of implementation for Small Enterprises |
Date
of implementation for Micro Enterprises |
|
|
(1) |
(2) |
(3) |
(4) |
(5) |
(6) |
(7) |
|
|
1 |
Cross
Recessed Screws |
18471
(Part 1) : 2023/ ISO 15481:1999 |
Fasteners
Cross Recessed Drilling Screws with Tapping Screw Thread Part 1 Pan Head |
Six
months from the date of publication of the QCO |
Nine
months from the date of publication of the QCO |
Twelve
months from the date of publication of the QCO |
|
|
2 |
18471
(Part 2) :2023/ ISO 15482:1999 |
Fasteners
Cross Recessed Drilling Screws with Tapping Screw Thread Part 2 Countersunk
Head |
|
||||
|
3 |
18471
(Part 3) :2023/ ISO 15483:1999 |
Fasteners
Cross Recessed Drilling Screws with Tapping Screw Thread Part 3 Raised
Countersunk Head |
|
||||
|
4 |
18476
: 2023/ ISO 15480:2019 |
Fasteners
- Hexagon Washer Head Drilling Screws with Tapping Screw Thread |
|
||||
|
5 |
18480
(Part 1) :2023/ ISO 7049 : 2011 |
Cross
Recessed Tapping Screws: Part 1 Pan Head |
|
||||
|
6 |
18480
(Part 2) :2023/ ISO 7050 : 2011 |
Cross
Recessed Tapping Screws Part 2 Countersunk Flat Head |
|
||||
|
7 |
18480
(Part 3) :2023/ ISO 7051 : 2011 |
Cross
Recessed Tapping Screw Part 3 Raised Countersunk Oval Head |
|
||||
|
8 |
7483
: 2018/ ISO 7045 : 2011 |
Pan
Head Screws With Type H or Type Z Cross Recess Product Grade A |
|
||||
|
9 |
7485
(Part 1) : 2018/ ISO 7046-1 : 2011 |
Countersunk
Flat Head Screws (Common head Style) With Type H or Type Z Cross Recess -
Product Grade A Part 1 Steel Screws of Property Class 4.8 |
|
||||
|
10 |
7485
(Part 2) : 2018/ ISO 7046-2 : 2011 |
Countersunk
flat head screws (common head style) with type H or Type Z Cross Recess -
Product Grade A part 2 Steel Screws of Property Class 8.8, Stainless Steel
Screws and Non Ferrous Metal Screws |
|
||||
|
11 |
7486
: 2018/ ISO 7047 : 2011 |
Raised
countersunk head screws (Common Head Style) with type H or type Z cross
recess Product grade A |
|
||||
|
12 |
18507
: 2024 |
Drywall
Screws Specification |
|
||||
|
13 |
18508
: 2024 |
Chipboard
Screws Specification |
|
||||
|
14
|
18509
: 2023 |
Cross-recessed
Countersunk Head Wood Screws Specification |
|
||||
[F.No.
P-29026/42/2023-LEI]