Copper including Copper Cathodes under IS 191:2007 Compulsory BIS Certification

· Restriction to Apply on both Imports and Domestic Industry

[Ministry of Mines Order S.O. 3847(E) dated 31^st August 2023]

S.O. 3847(E).-In exercise of the powers conferred by sub-sections (1) and (2) of section 16 read with section 17 and sub-section (3) of section 25 of the Bureau of Indian Standards Act, 2016 (11 of 2016), the Central Government is of the opinion that it is necessary so to do in the public interest and after consulting the Bureau of Indian Standards, hereby makes the following order, namely: -

1. Short title and commencement

(1) This Order may be called the Copper (Quality Control) Order, 2023.

(2) This Order shall come into force with effect from three months from the date of publication of this notification.

2. Application

This Order shall apply in relation to goods or article specified in column (1) of the Table below, but shall not apply to goods or article meant for export.

3. Compulsory use of Standard Mark

Goods or article specified in the column (1) of the said Table shall conform to the corresponding Indian Standard mentioned in the column (2) therein and shall bear the Standard Mark under a licence from the Bureau of Indian Standards in accordance with Scheme-1 of Schedule-II to the Bureau of Indian Standards (Conformity Assessment) Regulations, 2018.

4. Certifying and enforcing authority

The Bureau of Indian Standards shall be the certifying and enforcing authority for the goods or article specified in the column (1) of the said Table.

Table
Goods or article	Indian Standard	Title of Indian Standard
(1)	(2)	(3)
Copper	IS 191:2007	Copper-Specification

Note: For the purposes of the Table, it is clarified that the latest version of Indian Standards established and published by the Bureau from time to time in accordance with the provisions of clause (17) of section 2 of the Bureau of Indian Standards Act, 2016 (11 of 2016), shall apply from the date of such publication.

[F. No. 02/19/2023-ES]